Cooktop Cutouts in Dallas-Fort Worth, TX

Yes, Apex Stoneworx can cut a cooktop opening into an existing stone countertop in Dallas without replacing it. This applies whether you are upgrading to a larger cooktop or adding an opening that was not cut originally.

If the new cooktop is larger, the existing opening can be enlarged to match the new template dimensions. The cut follows the manufacturer's template to keep the fit accurate.

Rounded inside corners spread stress across the stone rather than concentrating it at a single point. Sharp corners are a common starting point for cracks, particularly as the cooktop heats and cools repeatedly.

Having the cooktop on-site is strongly recommended so the template can be verified against the actual unit. Manufacturer templates can vary, and confirming the fit before cutting prevents sizing errors.

A properly cut opening with correct corner radii and adequate stone bridges on all four sides maintains the slab's structural integrity. The key is keeping the stone strips within the recommended widths for your specific material.

Yes, a cooktop cutout is typically a larger rectangular opening that removes more material from the slab than a sink cutout. It also requires careful attention to the narrow stone strips left on each side, since those bridges carry the load of the surrounding countertop.